Fluke 62 MAX / Fluke 62 MAX+ Infrared Thermometer

Reading temperature levels in a wide variety of applications doesn't have to be difficult - with the Fluke 62 MAX+ infrared thermometer, you can get quick, accurate and reliable measurements of surface temperatures without the need to make direct contact.

You can use the Fluke 62 MAX+ infrared thermometer anywhere; these units are made tough with dust and water resistance as well as ultra-durable casing which can withstand a drop from a height of up to 3m. There's a reason why this thermometer's tagline is 'Handle Without Care' - take a look at the video below to see how useful and durable this infrared (IR) thermometer really is.

Precise, Reliable Non-Contact Temperature Measurements

Making a measurement with the Fluke 62 MAX+ is simple - just use the built-in precision laser point to determine your measurement point and the thermometer will quickly determine surface temperature with a high degree of accuracy.

There's many benefits to using the Fluke 62 MAX+ for your temperature measurements, including:

• Wide Temperature Measurement Range - the 62 MAX can measure temperature levels in Celsius or Fahrenheit from -30 to 500°C (-22 to 932°F)
• Accurate, Reliable Temperature Measurements - ±1.5°C or ±1.5% of reading typical accuracy
• Fast Temperature Measurements - responds with a temperature measurement in under 500ms
• 10:1 Distance-To-Spot Ratio with Laser Pointer - hold the thermometer approximately 10 inches away for a 1 inch measurement spot
• MIN, MAX, AVG and DIF modes - displays the minimum, maximum or average temperature, or the difference between two measurements
• Hi and Lo Alrms - rapid indication when measurements are outside limits
• Durable Design - IP54 rated for dust and water resistance and rugged enough to withstand drops from a height of 3m
• Small, Lightweight Design - clips onto your toolbelt or belt loop, or easily fits in your toolbox
• Large Size, Backlit Screen - read your data easily no matter what conditions you find yourself in

Ideal for Any HVAC Application

Reliable temperature measurements go hand-in-hand with HVAC work; thankfully, Fluke's 62 MAX+ thermometer delivers the accuracy and reliability you need.

This infrared thermometer is suitable for many different HVAC applications, including:

• Checking Discharge Air Temperature - easily check the discharge air temperature of an HVAC unit with ceiling discharge while standing on the ground (no ladders needed!)
• Check Thermostat Accuracy - put a value on the temperature output of your thermostats and make adjustments as necessary
• Check Inlet/Outlet Water Temperatures - non-contact measurements of water inlets and coil outlets are quick and easy with the 62 MAX. Ideal for determining correct water temperatures, heat transfer and valve operation
• Check Air Handler Coil Temperatures - specific coil temperatures should be present on these systems; use the 62 MAX to check if it's working like it should
• Examine Hot Water Boiler Temperature - see how hot or cold water from a boiler is and identify potential energy saving procedures
• Steam Trap Checks - find failed open/closed steam traps and take action
• Air Distribution Checks - a room or a space may have several air distribution ducts - with the 62 MAX, you can identify ducts which aren't working or show incorrect temperatures

Upgrade to the 62 MAX+ >>

Why not also consider upgrading to Fluke's 62 MAX+ model instead?

It may look the same as the standard 62 MAX, but the Plus model has even higher accuracy, wider temperature range and a number of other benefits.

This table shows the difference between each.