Fluke 88V/A Kit Automotive Multimeter Combo Kit

Solve problems on conventional and hybrid vehicles with this automotive multimeter combo kit that has improved measurement functions, troubleshooting features, accuracy and allows for maximum productivity. This kit comes with silicone test leads, long reach alligator clips, test probes, and an RPM 80 inductive RPM.

Fluke 88V/A KIT Offers

Reduce risks related to surges and spikes with this automotive multimeter that can withstand impulses of 8000 V. In addition, this multimeter complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V and features more problem-solving power, safety, convenience, and impact protection.

Features

• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
• Peak minimum/maximum to capture intermittent events as short as 250 micro seconds
• Large digit display with bright, two-level backlight makes this multimeter significantly easier to read than the old version
• 6000 counts, 3-¾ digits
• Measure up to 1000 V AC and DC
• Measure up to 10 and 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (temperature probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity
• RPM measurements with inductive pickup
• Millisecond pulse width measurements for fuel injectors
• Magnet hanger to attach meter to the vehicle and free your hands for other tasks
• 10,000 μF capacitance range for components and motor caps
• Minimum/maximum-average recording with minimum/maximum alert to capture variations automatically
• Peak capture to record transients as fast as 250 μs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without opening up the case
• "Classic" design with new removable holster with built in test lead and probe storage
• 10 meg ohm input impedance wont load circuits
• 0.1% DC accuracy
• Electrical safety: All inputs are protected to category III, 1000 V and category IV 600 V and they can withstand impulses in excess of 8000 V and reduce risks related to surges
• Position the meter in the most usable location with the magnetic hanger: The holster on this multimeter accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces and allows you to focus on taking measurements instead of holding the meter in your hand

Applications

• Automotive

Fluke 88V/A KIT Offers

Reduce risks related to surges and spikes with this automotive multimeter that can withstand impulses of 8000 V. In addition, this multimeter complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V and features more problem-solving power, safety, convenience, and impact protection.

Features

• Built-in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
• Magnetic hanger (included with kit) for easy set-up and viewing while freeing your hands for other tasks
• Peak minimum/maximum to capture intermittent events as short as 250 micro seconds
• Large digit display with bright, two-level backlight makes this multimeter significantly easier to read than the old version
• 6000 counts, 3-¾ digits
• Measure up to 1000 V AC and DC
• Measure up to 10 and 20 A for up to 30 seconds
• Built in thermometer lets you carry one less tool (temperature probe included)
• Frequency to 200 kHz and % duty cycle
• Resistance, continuity
• RPM measurements with inductive pickup
• Millisecond pulse width measurements for fuel injectors
• Magnet hanger to attach meter to the vehicle and free your hands for other tasks
• 10,000 μF capacitance range for components and motor caps
• Minimum/maximum-average recording with minimum/maximum alert to capture variations automatically
• Peak capture to record transients as fast as 250 μs
• Relative mode to remove test lead interference from low ohms measurements
• Auto and manual ranging for maximum flexibility
• Touch Hold to capture stable readings avoiding noisy signals
• Large display digits and two-level bright white backlight for increased visibility
• Analog bargraph for fast changing or unstable signals
• Input alert provides audible warning against wrong use of input jacks
• Improved selectable sleep mode for long battery life
• Access door for fast battery changes without opening up the case
• "Classic" design with new removable holster with built in test lead and probe storage
• 10 meg ohm input impedance wont load circuits
• 0.1% DC accuracy
• Electrical safety: All inputs are protected to category III, 1000 V and category IV 600 V and they can withstand impulses in excess of 8000 V and reduce risks related to surges
• Position the meter in the most usable location with the magnetic hanger: The holster on this multimeter accepts a small but extremely powerful magnet (Fluke Tpak) that holds the meter firmly to most steel surfaces and allows you to focus on taking measurements instead of holding the meter in your hand

Applications

• Automotive