MET/CAL® Calibration Management Software

Big productivity benefits with an intuitive interface

Automate

  • Automate calibration of a wide range of electrical and RF calibration standards and test equipment
  • Templates help you perform, record and report on manual calibration tests

Improve productivity

  • Increase workflow throughout up to 80% compared to manual approach
  • Reduce time to calibrate spectrum analyzer equipment from 11 hours to 1 or 2

Perform controlled, consistent tests

  • Create validated calibration procedures
  • Comprehensive library of thousands of automation procedures
  • Store all test parameters and traceability

Comply with standards

  • Help you meet the regulatory requirements of quality standards like ISO 9000, ISO.IEC 17025, ANSI Z540.3, and others
  • Create calibration certificates

Eliminate errors

  • Eliminate the risk of human errors that can occur when a technician adjusts outputs or records data manually

 

The complete solution for automating and managing your calibration workload

Calibration labs have their share of challenges: an increasing and more complex workload; fewer technicians; a growing list of quality standards. Above all, there is constant pressure to reduce costs. Fluke calibration software helps you meet those challenges by calibrating and managing your workload more efficiently and consistently.

MET/CAL® calibration management software includes MET/CAL® Procedure Editor and Runtime for automated calibration; plus MET/TEAM® » software for calibration work flow and asset management.

The MET/CAL and MET/TEAM » suite of software provide you with all the tools you need to:

  • Perform automated calibration on all kinds of test and measurement tools and equipment, including dc/lf, RF and microwave instruments.
  • Create, edit, test, and document calibration procedures, quickly and easily.
  • Configure and report a wider range of measurement uncertainty parameters and include verification data to provide an audit trail and support further analysis.
  • Track asset information including work order history and status, traceability, users, customers, and location.
  • Analyze and report asset information; produce customized printed certificates and reports.
  • Make data available to other corporate systems.
  • Import asset and calibration data into MET/TEAM software
  • Help meet the requirements of quality standards like ISO 9000, ISO/IEC 17025, NRC 10 CFR, ANSI Z540.3, and others.

With all of these capabilities, Fluke Calibration software offers the most comprehensive calibration automation solution available. And we back it up with the MET/SUPPORT Gold software support program to help keep you as productive as possible. Fluke Calibration also offers a variety of installation, training, and customization services to help you utilize the power of the MET/CAL and MET/TEAM » software suite.

Join the worldwide community of calibration professionals who have discovered the value of MET/CAL for increasing throughput and managing calibration assets more efficiently.

 

 
Minimum system requirements

MET/TEAM server (minimum requirements)

  • Microsoft® Windows® 7 64-bit
  • Microsoft Windows Server 2008 64-bit
  • Microsoft Windows Server 2008 R2 64-bit
  • 2.0 GHz Intel® Pentium® IV processor or equivalent
  • 2 GB of RAM
  • 4 GB of available hard drive space on the server

MET/CAL client

  • Microsoft Windows XP SP3 or later
  • Microsoft Windows XP SP3 or later
  • Microsoft Windows Server 2003
  • Microsoft Windows Vista (32 and 64-bit)
  • Microsoft Windows 7 (32 and 64-bit)
  • Microsoft Windows Server 2008 (32 and 64-bit)
  • Microsoft Windows Server 2008 R2 (64-bit)
  • 1 G Hz Intel Pentium 4 processor or equivalent
  • 1 GB of RAM
  •  2 GB of available hard drive space

 MET/TEAM client

Browser support for any of the following browsers:

  • Google Chrome™ version 18 or newer
  • Microsoft Internet Explorer® version 7 or newer
  • Apple Safari® 5.1 or newer
  • Mozilla Firefox® version 12 or newer

Hardware requirements are those required to run the browser, at a minimum this should be:

  • 1.5 GHz Intel Pentium 4 processor or equivalent
  • 512 MB of RAM

 Supported network protocols: TCP/IP

 Backup device: Strongly recommended

New features in recent MET/CAL software versions

New in the latest release

MET/CAL (v10.2) improvements:

  • New FSC for Fluke 5322A lets you fully automate calibration of the Electrical Safety Calibrator
  • New FSC for Fluke 8558A to automate the 8.5-digit Multimeter calibration
  • New FSC for Fluke 4180 and Fluke 4181 for automated calibration of IR thermometers
  • Enhanced results saving and improved error logging for failures
  • Easy collection of log files with a single click to provide to technical support for assistance without needing to comb through multiple separate files
  • Upgraded Procedure Editor for better usability and more choices for procedure writers
  • Upgraded instrument configuration screen for better usability, a more modern user interface and better control when moving and resizing windows
  • More meaningful and useful error messages

MET/TEAM (v3.0) improvements:

  • Significant speed improvements
  • Increased flexibility in Manual Templates
  • Improved Data Check editor makes it easier to set up customized data checks and access more of MET/TEAM with them
  • MET/TEAM API to interface with other applications, making it easier and safer to transfer data between applications
  • Dynamic calculation of manual template limits; when you change a set point tolerances are calculated automatically, providing better flexibility

What are you missing?

Having the latest version of MET/CAL software gives you access to many new features and functions. Here are just a few examples of the additional capabilities added with each new update.

New features in recent MET/CAL software versions

Features

9.0

9.1

9.2

10.0/10.1

10.2

New Runtime user interface

User-group-based security

Test results data export

Windows 10 compatibility

Settings stored directly in database

 

One workstation supporting multiple configurations

 

Automatic migration of legacy formatted procedures (PROC.DIR) to projects and PXEs

 

New procedure directory scheme for improved security and version control

 

Language support for MET/CAL - German, Russian, French, Spanish, Portuguese, Chinese, Italian, and Japanese

 

Global Unique Identifiers allowing access to SQL server replication

 

FSC Support for the Rohde & Schwarz NRPT sensor series for the Fluke Calibration 96270A

 

 

Enhanced results save process to MET/TEAM with improved logging

 

 

Support for MET/CONNECT as an alternative backend to MET/TEAM

 

 

 

FSC Support for the Fluke 5790B and Fluke 8588A

 

 

 

Additional logging and data saving improvements with both MET/TEAM and MET/CONNECT

 

 

 

FSC Support for the Fluke 5322A, Fluke 8558A, Fluke 4180, and Fluke 4181

 

 

 

 

Modernized Instrument Configuration Dialogs

 

 

 

 

More robust automatic reconnection to MET/TEAM after a lost connection