Fluke Calibration
Fluke Calibration 3150-4
Fluke Calibration 3150-4Multi-Hole Insert, (6 x 1/4") C for the 9150Product Highlights Insert, 9150-C Alumina w/6.25 in holes Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace...
Fluke Calibration 3141-2
Fluke Calibration 3141-2Insert, "A" Aluminum-Bronze w/Miscellaneous holes, 9141Product Highlights Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with...
Fluke Calibration 3140-2
Fluke Calibration 3140-2Insert, 9140 "A" with Misc Holes, ringProduct Highlights Insert “A” 9140 Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is...
Fluke Calibration 3103-2
Fluke Calibration 3103-2Insert, "A" with Misc holes, for the 9011 & 9103Product Highlights Insert “A” 9103 Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts....
Fluke Calibration 6532-200M-B
Fluke Calibration 6532-200M-BE-DWT-H A200M/A20M, 4 to 200 MPa, 600 to 30,000 psiProduct Highlights One-year measurement uncertainty is ± 0.02% of reading from 10% to 100% with one Q-RPT, and from 1% to 100% with two Q-RPTs Low torque variable volume allows for pressure generation up...
Fluke Calibration 6531-200M-B
Fluke Calibration 6531-200M-BE-DWT-H A200M, 20 to 200 Mpa, 6,000 to 30,000 psiProduct Highlights One-year measurement uncertainty is ± 0.02% of reading from 10% to 100% with one Q-RPT, and from 1% to 100% with two Q-RPTs Low torque variable volume allows for pressure generation up...
Fluke Calibration 1586-2586/C
Fluke Calibration 1586-2586/CHigh-Capacity Module w/o Relay Card, Accredited CalibrationProduct Highlights If you want to configure the 1586A yourself to work with the 1586-2586 High-Capacity Module, you will need a relay card. However, if you already have a slot in the back panel of the 1586A...
Fluke Calibration 5628-15-L
Fluke Calibration 5628-15-LSecondary Probe, PRT, 25 ohm 2nd Level, 15"Product Highlights Range to 661 °C Meets all ITS-90 requirements for resistance ratios RTPW drift < 20mK after 500 hours at 661 °C Webinars Automating and Documenting Temperature Calibration Webinar with Fluke Calibration Differential Pressure Meter...
Fluke Calibration 5610-9-B
Fluke Calibration 5610-9-BThermistor Probe, 1/8" x 9", Stainless, Bare WireProduct Highlights Resistance: Nominal 10,000 Ohm's at 25°C Range: 0°C to 100°C Calibration: R vs T table with 0.1°C increments, interpolation equation furnished Accuracy: Table and equation are accurate to ±0.01°C Stability: Better than ±0.01°C per...