Allen Bradley PLC I/O Module for use with SLC 500 Series, Analogue
Allen Bradley PLC I/O Module for use with SLC 500 Series, AnalogueDescriptionRTD/Resistance Input ModuleSuitable for resistance temperature detectors (RTD's), and direct resistance measurement.16 bit resolution4 or 8 inputs each individually configurable to read °C, °F or OhmsCompatible with 12 different RTD typesSupports 2, 3 and 4 wire devicesOpen/short-circuit and out...
Allen Bradley PLC I/O Module for use with SLC 500 Series, Analogue
Description
RTD/Resistance Input Module
Suitable for resistance temperature detectors (RTD's), and direct resistance measurement.
16 bit resolution
4 or 8 inputs each individually configurable to read °C, °F or Ohms
Compatible with 12 different RTD types
Supports 2, 3 and 4 wire devices
Open/short-circuit and out of range detection
4 or 8 inputs each individually configurable to read °C, °F or Ohms
Compatible with 12 different RTD types
Supports 2, 3 and 4 wire devices
Open/short-circuit and out of range detection
Allen Bradley RTD module
The Allen Bradley module receives and stores digitally converted analogue data from RTDs or other resistance inputs such as potentiometers for being processed by all the fixed and modular SLC 500 processors. An RTD consists of a temperature-sensing element connected by 2, 3 or 4 wires that provide input to the RTD module. This module supports connections from any combination of up to eight RTDs of various types ( platinum, nickel, copper or
nickel-iron) or other resistance inputs.
nickel-iron) or other resistance inputs.
Features and Benefits
The module provides on-board scaling and converts RTD input to temperature (°C, °F or reports resistance input in ohms)
This module provides an indication if the input signal is out-of-range
16bit resolution
4 or 8 inputs each individually configurable to read °C, °F or Ohms
Open/short-circuit and out of range detection
LED indicators
Low pass digital filter with programmable notch (filter) frequencies
Module auto calibrates at power-up. Periodic calibration (every 5 minutes) can also be enabled.
This module provides an indication if the input signal is out-of-range
16bit resolution
4 or 8 inputs each individually configurable to read °C, °F or Ohms
Open/short-circuit and out of range detection
LED indicators
Low pass digital filter with programmable notch (filter) frequencies
Module auto calibrates at power-up. Periodic calibration (every 5 minutes) can also be enabled.
Applications
Industrial automation
Robotics
Automobile industry
Robotics
Automobile industry
Certifications
ANSI/ESD S20.20:2014
BSEN 61340-5-1:2007
BSEN 61340-5-1:2007
Specifications
| Attribute | Value |
| Accessory Type | PLC I/O Module |
| For Use With | SLC 500 Series |
| Input Type | Analogue |
| Maximum Operating Temperature | +60°C |
You can use this tab for adding shipping details, return policies and information or measurements etc.
